Definitive Technology Descend Series DN10 10” Powered Subwoofer

DN10’s unique 3XR™ Architecture means it delivers all the bass you need and then some, performing significantly louder and clearer than other 10” subwoofers.

Warranty:

3-year manufacturer's warranty

Features:

• 10" Long-Throw Woofer
• Dual 10" Passive Bass Radiators
• 200W RMS Power / 500W Peak Power
• Class-D Amplification
• 30 to 200 Hz Frequency Response
• Front-Firing Configuration
• Low Pass Filter
• 0/180° Phase Adjustment

Video Review:

3XR™ ARCHITECTURE EVEN MORE BASS FROM THE SAME SPACE

Descend’s unique 3XR Architecture provides triple the bass-producing surface area of a traditional ported subwoofer. This extra surface area moves more air, resulting in massive low end. And because 3XR doesn’t use ports, it also provides crystal-clear sound with no port noise distortion.

PASSIVE RADIATORS FOR LOUDER, LOWER, CLEANER BASS

As the core technology behind Descend’s 3XR Architecure, its passive bass radiators enable the DN10 to play as loud and low as a 12” ported sub without unwanted port noise distortion. Passive radiators also deliver a smooth frequency response like a sealed sub, but with the port-like ability to play louder and lower in a smaller enclosure.

10” DESCEND DN10 AS MUCH BASS AS A PORTED 12” SUBWOOFER
The DN10 is equipped with a 500-watt peak custom Class D digital amplifier, designed to get the most out of the DN10’s 3XR Architecture. This custom amplification provides the DN10 enough power and efficiency to play as low as 28Hz without taking up a ton of space.

CUSTOM CLASS D DIGITAL AMPLIFICATION FOR DEEP BASS

Because the DN10 Class D amplifier is so efficient, little power is wasted as heat, and its entire output is dedicated to providing significantly smoother bass and greater impact. This allows the DN10 subwoofer to blend naturally into any audio system while producing greater volume and significantly deeper impact than competitive designs.

CONTROL & CUSTOMIZATION PLAYS WELL WITH OTHERS

You can customize the DN10 to the needs of your application, system and space. The DN10 features built-in controls for variable volume, low pass filter and phase (0/180°) for optimum bass levels and the ability to customize it to the specific needs of your system.

BACK PANEL CONTROLS FOR OPTIMIZED BASS LEVELS

Manually adjust DN10’s variable volume, low pass filter, and phase so it always sounds perfect within your system.

VARIABLE VOLUME
Adjust the volume level of your subwoofer to ensure perfectly proportioned bass for your audio system and your room.

LOW PASS FILTER
Keep the bass clean by activating the DN10’s Low Pass Filter. The Low Pass Filter ensures that only the frequencies intended to be reproduced by the DN10 get through to the woofer. 100% of the DN10’s prodigious power goes to reproducing bass, and 100% of your amplifier’s power goes to vocals, instruments, and high frequencies. It doesn’t get cleaner than that.

PHASE
Adjusting the DN10’s phase control ensures subwoofer timing is tightly synced with the rest of the speakers, presenting pinpoint-accurate audio for movies and music.

ONE, TWO, OR FOUR SUBS FOR SMOOTHER BASS THROUGHOUT THE ROOM
While a single subwoofer can add bass and enhanced realism to any system, it may not provide consistent frequency response throughout the room.
When two or more subwoofers are properly employed throughout the room, sound waves disperse more evenly, flattening the frequency response. The result is smoother bass throughout the room, helping to eliminate boomy locations or dead spots.

Technical Specifications: