
ELAC Miracord 50 Turntable – MRC-501
- Please get in touch with us before placing a direct order
- Authorised Elac Dealer in India
- Brand New in a Box Unit(s)
- Price is inclusive of all taxes
- Official Elac India Warranty
Country of Origin:
Country of Origin:
Smooth vinyl precision. | ELAC Miracord 50 Turntable – MRC-501
ELAC’s Miracord 50 Turntable is designed to deliver exceptional vinyl transcription, inspired by the iconic Miracord name from the Golden Age of Stereo, when turntables reigned supreme. The Miracord 50 is carefully engineered with a belt-drive motor and die-cast aluminum platter. A precision static balanced, straight-tube tonearm with removable headshell features a factory-mounted MM phono cartridge. Designed with convenience in mind, the Miracord 50 is equipped with a built-in defeatable phono preamplifier, allowing you to add this turntable to virtually any music system.
1-year manufacturer's warranty
Anti-resonant chassis
Superior isolation is achieved with a chassis designed to minimize the sonic effects of vibration and feedback.
Built-in phono equalizer amplifier
Unlike most turntables, the Miracord 50 comes complete with a built-in phono preamp for correct RIAA equalization. Just plug it in and enjoy rich LP sound!
Precision tonearm and cartridge
The tonearm is a static-balance, straight- tube design with precision bearings, built-in anti-skate adjust- ment and removable bayonet-style headshell.
Turntable Section |
Drive System: Belt drive
Motor: DC motor Selectable Speeds: 33⅓ and 45 rpm Motor Servo: Speed rotation and servo system Rotation Speed Variation: +/-1% Wow and Flutter: 0.1% Signal-to-Noise Ratio: -67 dB or higher (A-weighted) -60 dB or higher (unweighted) Platter: Aluminum die-cast Platter Diameter: 0 in / 300 mm |
Tonearm Section | Type: Aluminum tube, static-balanced Effective Arm Length: 8 in / 223.6 mm Stylus Pressure Range: 0 to 4 g Cartridge Weight Range: 3.5 to 6g Effective Arm Mass: 27.4 g Overhang: 18.6 mm Offset Angle: 25 degrees Anti-Skating: Adjustment Supported Main Bearing: Stainless steel |
Cartridge Section | Type: Audio-Technica AT91 moving magnet Stylus Construction: Bonded diamond Mount: Half-inch Frequency Response: 20 Hz to 20 kHz Channel Separation: >18 dB Channel Balance: 2.5 dB Vertical Tracking: Angle 20 degrees Stylus Pressure: 2.0 g +/-0.5 g Cartridge Weight: 5.0 g +/-0.5 g Headshell Weight: 0 g (including screws, nuts and wires) |
Phono Equalizer Amplifier | Type: Moving magnet (MM) Phono Output: 2.5 mV (1 kHz, 3.54 cm/sec) Line Output: 140 mV (-17 dBV) Phono/Line: Switchable Supported Load Impedance: 47 kΩ |
Connector | RCA pin jack including RCA cable accessories |
Power Consumption | 1.5 W (less than 0.5 W at standby) |
Dimension | 5.5 x 16.05 x 14.20 inches |
Weight | 5.4 kg |