Emotiva XPA-2 Gen3 2-ch 300W Audiophile Power Amplifier
- Get in touch for a Discounted Price
- Authorised Emotiva Partner in India
- Brand New in a Box Unit(s)
- Price is inclusive of all taxes
- Official Emotiva India Warranty
Country of Origin:
Country of Origin:
The XPA-2 is a two-channel audiophile quality power amplifier, and is perfect for powering a superb quality stereo or 2.1 channel music system or, the two critical main channels of a 5.1 channel or 7.1 channel home theater system.
2-year manufacturer's warranty
One of the design enhancements shared by all Emotiva’s new XPA power amplifiers is their new, specially designed, high current, switch mode power supply (SMPS). Emotiva’s powerful, intelligent new power supply offers all of the benefits of a classic transformer-based design, but avoids virtually all of the limitations. It can deliver over 3 kW of fully regulated power, which ensures optimum performance under a wide range of load conditions, and plenty of dynamic power to ensure that musical peaks will never be compressed or limited. However, it’s also more efficient, more reliable, and much lighter.
CLASS A/B SOUND QUALITY MEETS OPTIMIZED CLASS H EFFICIENCY
The High-Powered Single Channel Modules used in the XPA-2 utilize a fully analog Class A/B output stage, and Emotiva’s highly regarded Soft-Switch™ Optimized Class H power supply topology, which increases their efficiency significantly without compromising their superb Class A/B performance and sound quality. At low power levels, each channel operates on a relatively low supply voltage, to minimize quiescent power consumption and standby power losses. Then, when the demand for power increases, it instantly and seamlessly switches to a higher voltage rail to ensure that the signal passes cleanly and without clipping. This process happens on a continuous basis - in real time, allowing greater overall efficiency, cooler operation, longer component life, reduced power consumption, and increased reliability.
SOUND QUALITY FIRST
MODERN EFFICIENT CIRCUIT DESIGN
QUALITY CONSTRUCTION
FLEXIBLE SIGNAL CONNECTIONS AND POWER OPTIONS
PROTECTION
Power Output |
|
Power Bandwidth (at rated power; 8 Ohm load) |
20 Hz to 20 kHz (+ / – 0.1 dB) |
Broad Band Frequency Response |
5 Hz to 80 kHz +0/-2 dB |
THD + noise |
< 0.005%; at 100 watts RMS; 1 kHz; 8 Ohms |
Signal to Noise Ratio (8 Ohm load) |
|
Minimum Recommended Load Impedance (per channel) |
4 Ohms (which equals one 4 Ohm load or two paralleled 8 Ohm loads). |
Damping Factor (8 Ohm load) |
> 500 |
Input Sensitivity (for rated power; 8 Ohm load) |
1.5 V |
Gain |
29 dB |
Input Impedance |
|
Input Connections (High-Powered Single Channel Modules) |
Unbalanced (RCA); balanced (XLR); one each per channel, independently selectable |
Input Connections (Stereo Modules) |
2 Unbalanced (RCA); 2 balanced (XLR); two per channel, independently selectable |
Speaker Output Connections |
Audiophile grade, gold plated, 5-way binding posts |
Trigger |
|
Dimensions |
|
Weight |
|