Skip to content
Experience cinematic magic at home! Chat with us for a free consultation and deals!
Chat with us for best deals!
Emotiva XPA-7 Gen3 7 Channel Audiophile Home Theater Power Amplifier

Emotiva XPA-7 Gen3 7 Channel 300W Audiophile Home Theatre Power Amplifier

by Emotiva
SKU XPA-7 Gen3
Rs. 374,500.00 - Rs. 374,500.00
Rs. 374,500.00
Rs. 374,500.00
Rs. 374,500.00 - Rs. 374,500.00
Rs. 374,500.00
  • Please get in touch with us before placing a direct order
  • Authorised Emotiva Dealer in India
  • Brand New in a Box Unit(s)
  • Price is inclusive of all taxes
  • Official Emotiva India Warranty

Country of Origin:

The new XPA-7 is a seven-channel audiophile quality power amplifier, and is perfect for powering the seven main bed channels of a 5.1 channel, 7.1 channel, or Dolby Atmos / DTS:X home theater system

Warranty:

2-year manufacturer's warranty

Features:

  • Audiophile grade Class A/B output stages and a massive silent switch mode power supply.
  • Seven high-powered single channel modules.
  • Plenty of power for a great 7.1 channel surround sound system.
  • Use with an XPA-4 or a BasX A4 in a great 11.1 channel system.

Video Review:

REGULATED SWITCH MODE POWER SUPPLY (SMPS)

One of the design enhancements shared by all of Emotiva’s new XPA power amplifiers is their new, specially designed, high current, switch mode power supply (SMPS). Emotiva’s powerful, intelligent new power supply offers all of the benefits of a classic transformer-based design, but avoids virtually all of the limitations. It can deliver over 3 kW of fully regulated power, which ensures optimum performance under a wide range of load conditions, and plenty of dynamic power to ensure that musical peaks will never be compressed or limited. However, it’s also more efficient, more reliable, and much lighter.

CLASS A/B SOUND QUALITY MEETS OPTIMIZED CLASS H EFFICIENCY

The High-Powered Single Channel Modules used in the XPA-7 utilize a fully analog Class A/B output stage, and Emotiva’s highly regarded Soft-Switch™ Optimized Class H power supply topology, which increases their efficiency significantly without compromising their superb Class A/B performance and sound quality. At low power levels, each channel operates on a relatively low supply voltage, to minimize quiescent power consumption and standby power losses. Then, when the demand for power increases, it instantly and seamlessly switches to a higher voltage rail to ensure that the signal passes cleanly and without clipping. This process happens on a continuous basis - in real time, allowing greater overall efficiency, cooler operation, longer component life, reduced power consumption, and increased reliability.

Technical Specifications:

Power Output
  •  300 watts RMS/channel; 20 Hz – 20 kHz; THD<0.1%; 8 Ohms; one channel driven
  •  550 watts RMS/channel; 20 Hz – 20 kHz; THD<0.2%; 4 Ohms; one channel driven
  •  300 watts RMS/channel; THD<0.1%; 8 Ohms; two channels driven
  •  490 watts RMS/channel; THD<0.1%; 4 Ohms; two channels driven
  •  200 watts RMS/channel; THD<0.1%; 8 Ohms; ALL SEVEN channels driven

Power Bandwidth (at rated power; 8 Ohm load)

20 Hz to 20 kHz (+ / – 0.1 dB)

Broad Band Frequency Response

5 Hz to 80 kHz +0/-2 dB

THD + noise:

< 0.005%; at 100 watts RMS; 1 kHz; 8 Ohms

Signal to Noise Ratio (8 Ohm load)

> 117 dB; ref FTC rated power; unbalanced input (A-weighted). > 91 dB; ref 1 watt; unbalanced input (A-weighted)

Minimum Recommended Load Impedance (per channel)

4 Ohms (which equals one 4 Ohm load or two paralleled 8 Ohm loads)

Damping Factor (8 Ohm load)

> 500

Input Sensitivity (for rated power; 8 Ohm load)

1.5 V

Gain

29 dB

Input Impedance
  •  33 kOhms (balanced)
  •  23.5 kOhms (unbalanced)

Input Connections (High-Powered Single Channel Modules)

Unbalanced (RCA); balanced (XLR); one each per channel, independently selectable

Input Connections (Stereo Modules)

2 Unbalanced (RCA); 2 balanced (XLR); two per channel, independently selectable

Speaker Output Connections

Audiophile grade, gold plated, 5-way binding posts

Trigger
  •  Trigger Input: 5 – 12 V (AC or DC); <10 mA input current required
  •  Trigger Output: 12 VDC; can drive any load up to 120 mA.

Standby

push button (halo ring changes color to indicate Standby or On)

Status LEDs

one per channel; blue. Status LEDs change to red to indicate a fault condition

AC Power switch

rocker switch (switches AC main power)

Status LEDs switch

disables front panel Status LEDs and dims Standby button halo

Input selector switches (one per channel)

metal toggle switches; select between balanced and unbalanced inputs

Circuit Breaker

press button to reset circuit breaker

Protection

The XPA Gen3 is protected against excessive operating temperature, shorted speaker connections, ground faults, and other common fault conditions.

Dimensions
  •  17” wide x 8” high x 19” deep (unboxed; including feet)
  •  17” wide x 7” high x 19” deep (unboxed; without feet)
  •  24-1/2” wide x 12” high x 24-3/4” deep (boxed)

Weight
  •  53 lbs (unboxed)
  •  58 lbs (boxed)

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)