The Stage 260F is the midsize floorstander in JBL's Stage 2 Series, designed and engineered at Harman's Northridge acoustic centre in California. It is a 2.5-way design running dual 6.5 inch polycellulose ribbed cone woofers with a 1 inch anodised aluminium dome tweeter loaded into JBL's next generation HDI waveguide. The result is the deep, room-filling bass JBL is known for, paired with a tweeter that stays neutral both on and off axis.
The 2.5-way crossover is the part that makes it work. One woofer runs full up to just below the tweeter for a clear midrange, while the second is crossed lower and dedicated to bass, so you get a cohesive top end without giving up low frequency weight. Dual flared racetrack ports fire from the rear and are shaped to cut port noise, and the cabinet carries premium touches for the price including magnetically attached grilles, a floating front baffle and trim rings. It is sold as a single speaker, and a dedicated set of Atmos binding posts lets you add the matching 240H height module later with the wiring hidden.
Key Features
- 2.5-way floorstanding design for cohesive full-range sound
- Dual 6.5 inch polycellulose ribbed cone woofers
- 1 inch anodised aluminium dome tweeter
- Next generation HDI waveguide for neutral dispersion
- Precision 2.5-way crossover with premium components
- Dual flared racetrack rear-firing tuned ports
- Dedicated Atmos binding posts for the 240H module
- Integrated wire management for a clean rear
- Sturdy 5-way binding posts for flexible connection
- Magnetically attached grilles and floating front baffle
- Frequency response of 40 Hz to 25 kHz
- Available in Espresso and Latte finishes
Warranty
This product is covered by the manufacturer's warranty through JBL's authorised distributor in India. [VERIFY: confirm exact warranty term for JBL Stage 260F under Harman India before publish.]
Why Consider the JBL Stage 260F
A pair of dual-woofer floorstanders like the 260F is the point where a stereo or home theatre system stops needing a subwoofer for most music. The two 6.5 inch drivers move enough air to fill a medium to large room on their own, and the 2.5-way arrangement keeps voices and detail clean rather than letting the bass drivers muddy the midrange. The HDI waveguide is the JBL signature here, spreading the treble evenly so the sound holds up whether you are in the sweet spot or off to the side, which matters in real living rooms where nobody sits dead centre. The Atmos-ready terminals also make it a sensible long-term buy, since you can start in stereo and grow into a full Dolby Atmos layout with the 240H module.
Ideal For
- Medium to large living rooms wanting full-range sound without a subwoofer
- Stereo music systems built around a quality integrated amplifier
- Home theatre front left and right in a 5.1 or larger system
- Listeners planning to grow into Dolby Atmos with the 240H module
- Rooms where seating is spread out and off-axis sound matters
- Buyers who want JBL bass and imaging at a real-world price
What's in the Box
- One JBL Stage 260F floorstanding loudspeaker
- Plinth base
- Four mounting screws
- Four floor spikes
- Assembly tool
- Speaker grille
- Safety sheet and quick-start guide
Technical Specifications
| Design and Drivers |
| Type |
2.5-way floorstanding loudspeaker, sold as a single piece |
| Low frequency driver |
Dual 6.5 inch (165 mm) polycellulose ribbed cone |
| High frequency driver |
1 inch (25 mm) anodised aluminium dome |
| Waveguide |
Next generation HDI |
| Performance |
| Frequency response, plus or minus 6 dB |
40 Hz to 25 kHz |
| Sensitivity at 1 m, 2.83 V |
90 dB |
| Nominal impedance |
6 ohms |
| Recommended amplifier power |
20 to 225 watts |
| Crossover frequencies |
1.3 kHz and 1.7 kHz |
| Enclosure tuning |
Bass reflex, dual flared racetrack rear-firing ports |
| Cabinet and Finish |
| Grille |
Magnetically attached |
| Binding posts |
5-way, with dedicated Atmos terminals |
| Finish |
Espresso or Latte |
| Dimensions and Weight |
| Dimensions with base (H x W x D) |
1036 x 310 x 362 mm (40.8 x 12.2 x 14.3 inch) |
| Dimensions without base (H x W x D) |
1113 x 241 x 409 mm (43.8 x 9.5 x 16.1 inch) |
| Product weight |
19.5 kg (43.0 lbs) each |