Featuring an all-new titanium compression driver, 90x90 compressed molded-rubber Tractrix horn, redesigned bifurcated cabinet, cast basket Cerametallic woofers and finished in a premium, furniture-grade wood veneer - the RF-7 III floorstanding speaker champions our legendary, high-performance Klipsch sound.
Warranty:
2-year manufacturer's warranty
Features:
All-New 1 3/4" Titanium Compression Driver
90x90 Compressed Molded-Rubber Tractrix Horn
Redesigned Bifurcated Cabinet
Dual Tractrix Ports
Dual 10" Cast Basket Cerametallic Woofers
Premium Furniture-Grade Wood Veneers
Assembled in Hope, AR
Video Review:
90° X 90° TRACTRIX® HORN The redesigned Tractrix Horn utilizes a circular horn throat paired to a square horn mouth to further improve high-frequency response and extension while enhancing imaging and dynamics. The compressed molded rubber construction adds high-frequency damping to reduce harshness and improve detail. This creates the cleanest, most natural sound possible.
ALL-NEW DRIVING FORCE The compression driver features a new phase plug design to improve phase coherency at the throat of the horn, resulting in improved sound pressure linearity at high frequencies.
SPUN COPPER CERAMETALLIC WOOFERS™ Cerametallic woofers represent the pinnacle of Klipsch driver design, maintaining exceptional rigidity, and lightweight construction, for minimal cone breakup and distortion. When paired with the Tractrix horn-loaded compression driver, it provides speaker efficiency highest in its class.
NEW DUAL CHAMBER + TRACTRIX® PORT The RF-7 III new bifurcated enclosure allows each 10” driver and port to work independently from the other. This improves the linearity of both drive systems, and minimizes standing wave problems inside the cabinet that can cause frequency anomalies in the sensitive midrange frequencies.
Utilizing Tractrix geometry, the new RF-7 III ports allow for the most efficient air transfer from the cabinet — for the cleanest, most powerful low frequency response on the market.
CAST FRAME WOOFER DESIGN Each 10” woofer feature a heavy-duty cast aluminum frame for resonant-free operation. In addition, each woofer incorporates a dual shorting-ring magnet structure design to eliminate modulation of the magnetic flux resulting in improved linearity of cone movement.
FURNITURE GRADE WOOD VENEERS The RF-7 III floorstanding speaker enclosures all utilize furniture grade wood veneers, and are available in Black Ash, Cherry & Walnut.
DESIGNED & ASSEMBLED IN AMERICA These speakers are built to rigid Klipsch standards — the toughest in the industry. Remember great sound? We do, too. These speakers are Designed & Assembled in the USA, by proud craftsmen in Hope, Arkansas. Just like Paul W. Klipsch (PWK) intended.
Technical Specifications:
Speaker Configuration
2-Way
Power Handling
250 W RMS 1000 W Peak
Drivers
2 x 10" / 254 mm Cerametallic Cone Woofer 1.75" / 44.45 mm Titanium Tweeter
Frequency Response
32 Hz to 25 kHz (±3 dB)
Wired I/O
2 x Binding Post Pair
Speaker System
Speaker Configuration
2-Way
Power Handling
250 W RMS 1000 W Peak
Bi-Amp Capability
Yes
Drivers
2 x 10" / 254 mm Cerametallic Cone Woofer 1.75" / 44.45 mm Titanium Tweeter
Enclosure Type
Bass-Reflex
Ports
2 x Rear-Firing
Frequency Response
32 Hz to 25 kHz (±3 dB)
Impedance
8 Ohms
Wired I/O
2 x Binding Post Pair
Crossover
1300 Hz
Sensitivity
100 dB
Physical
Environmental Protection
No
Placement & Mounting Options
Floorstanding (with Included Hardware)
Grille
Cloth (Removable)
Dimensions
13.9 x 49 x 17.9" / 35.3 x 124.5 x 45.5 cm (with Base)
