The Parasound ZoneMaster ZM2 is a compact half-width stereo power amplifier delivering 120 watts per channel into 8 ohms and 150 watts into 4 or 2 ohms, with a built-in 80Hz low-pass subwoofer mode, speaker-level input, A/B speaker outputs for up to four speakers, and looping 12V trigger output. Available while stocks last.
The built-in 80Hz, 18dB per octave low-pass filter in mono/sub mode allows the ZM2 to drive passive in-wall, in-ceiling, or standalone subwoofers directly without an external crossover. A speaker-level input makes it straightforward to integrate into systems where the main amplifier or AV receiver has no dedicated preamplifier outputs. Two pairs of speaker terminals per channel accept up to 12-gauge wire via detachable connectors. ProHiFi is an authorised Parasound dealer in India.
The Class AB input stage with premium Class D power stage keeps the unit cool and efficient in continuous use. Looping RCA outputs provide a full-range mono output and a separate 80Hz low-pass mono subwoofer output for additional downstream components. Per-channel level controls, auto turn-on via 12V trigger with looping output or audio sensing, and short-circuit and overheat protection with front-panel indicators complete the feature set. The power supply accepts 100-250V AC automatically, confirming India 230V mains compatibility.
Key Features
- 120W x 2 into 8 ohm; 150W x 2 into 4 or 2 ohm
- Class AB input stage with premium Class D power stage
- 2 ohm stable for driving multiple speaker pairs
- Built-in 80Hz, 18dB/octave low-pass filter in mono/sub mode
- Speaker-level input for systems without preamplifier outputs
- A and B speaker outputs per channel (4 speakers total)
- Detachable speaker connectors; accepts up to 12-gauge wire
- Looping full-range and 80Hz sub RCA mono outputs
- Per-channel input level controls
- 12V trigger with looping output; audio sensing auto-on
- 100-250V AC automatic; India 230V compatible
- Half-width 1U chassis; 220 x 51 x 254mm; 2.0kg; Black
Warranty:
3-year manufacturer's warranty
Why Consider the Parasound ZoneMaster ZM2
The ZM2 is the right choice for listeners who need compact, flexible amplification for a secondary zone, outdoor speakers, passive subwoofer drive, or a system where the source has no dedicated preamplifier output. The speaker-level input and 80Hz built-in crossover address the two most common practical barriers in real-world zone and subwoofer installations, and the 2 ohm stability means multiple speaker pairs can be driven from the A and B outputs without risk. The half-width chassis pairs naturally with the ZPre3 in a compact control and amplification stack. Stock is limited as this model is no longer in production.
Ideal for
- Secondary zone or outdoor speaker amplification in a compact half-width chassis
- Passive subwoofer drive using the built-in 80Hz low-pass mono/sub mode
- Systems without preamplifier outputs using the speaker-level input
- Multi-speaker setups driving up to four speakers across A and B outputs
- ZC Series builds alongside the ZPre3 as a matched half-width system
- Compact rack installations needing looping 12V trigger and sub output
Technical Specifications
| Specification |
Detail |
| Power Output |
| Stereo (8 ohm, both channels) |
120W x 2 (RMS, 20Hz to 20kHz) |
| Stereo (4 ohm, both channels) |
150W x 2 (RMS, 20Hz to 20kHz) |
| Stereo (2 ohm, both channels) |
150W x 2 (RMS, 20Hz to 20kHz) |
| Minimum Speaker Impedance |
2 ohm (A and B outputs of a single channel) |
| Circuit Design |
| Topology |
Class AB input stage with premium Class D power stage |
| Performance |
| Frequency Response |
20Hz to 20kHz, plus 0 / minus 0.25dB; 5Hz to 50kHz, plus 0 / minus 3dB |
| THD at Typical Listening Levels |
Less than 0.05% |
| THD at Full Power |
Less than 1.0% |
| SNR (A-weighted) |
Greater than 112dB |
| Interchannel Crosstalk at 20kHz |
70dB |
| Total Gain (level controls at max) |
29dB |
| Crossover |
| Low-Pass Filter (Mono/Sub Mode) |
80Hz, 18dB per octave |
| Inputs and Outputs |
| Line-Level RCA Inputs |
1 pair (with per-channel level controls) |
| Speaker-Level Input |
Yes (for systems without preamplifier outputs) |
| Speaker Outputs |
A and B per channel; detachable connectors; up to 12-gauge wire |
| Full-Range Mono RCA Output |
Yes (looping) |
| 80Hz Mono Subwoofer RCA Output |
Yes (looping) |
| Mono Mode |
Yes (combines L and R for single speaker) |
| Control |
| 12V Trigger |
Input with looping output (9-12VDC, 5mA) |
| Audio Sensing |
Yes (2mV) |
| Protection |
Short circuit and overheat with front-panel indicators |
| Power |
| AC Mains Voltage |
100-250 VAC, 50/60Hz (automatic) |
| Standby |
0.5W |
| Idle |
15W |
| Typical Listening |
30W |
| Maximum |
300W |
| General |
| Dimensions (W x H x D) |
220 x 51 x 254 mm (with feet) |
| Weight |
2.0 kg |
| Available Finishes |
Black |
| Chassis |
Half-width 1U; rack mount kit available separately (ZRK) |
| Country of Design |
United States |